Ammco® Automotive Lifts
CV-Series 2n1 10K Lift
The Ammco CV-Series 2n1 autmotive lifts hoist a hefty 10,000 lbs. of
passenger car, light truck or SUV while providing a clear floor for
unimpeded motion. The CV-Series steps up from the CD-Series with a longer warranty, adjustability, and truck adapter kit standard while maintaining competitive pricing. As always, Ammco stands behind everything you stand under.
Exclusive Patented 2n1 Asymmetrical/Symmetrical Design
The New and Improved Ammco CV-Series 2n1 lift features three-stage telescopic front arms, adjustable height and width options, wide rubber door guards and a padded overhead shut off bar just to name a few. It hoists a hefty 10,000 lbs. of passenger car, light truck or SUV while providing a clear floor for unimpeded motion
2n1 Asymmetrical/Symmetrical Design
The Ammco CV-Series 2n1 Lift gives you the option of
selecting either asymmetrical or symmetrical lifting
depending on the vehicle you’re servicing. The
CV-Series also provides a wide, open workspace for mobile shop equipment and personnel.
Specifications
| Maximum Capacity* |
10,000 lbs. |
| Rise Height1 |
76" (1930 mm) |
| Column Height (min/max) |
11' 11-1/2" / 12' 5-1/2"
(3645mm / 3797mm) |
| Cylinder Height at Full Rise |
12' 1-3/8" (3693 mm) |
| Adj. Overall Width |
10' 11" / 11' 4-3/4"
(3327mm / 3473mm) |
| Drive-thru Clearance (min/max) |
92-3/8" / 98-3/8"
(2346mm / 2499mm) |
| Floor to Overhead Switch (min/max) |
11' 6" / 12'
(3505mm / 3658mm) |
| Front Arm Reach (min/max) |
21-3/4" / 43-1/2" (553mm / 1105mm) |
| Rear Arm Reach (min/max) |
38-5/8" / 61-3/8" (981mm / 1559mm) |
| Screw Pad Height2(min/max) |
3-7/8" / 7-1/8"
(98mm / 181mm)
|
| Inside of Columns (min/max) |
104-1/2" / 110-1/2"
(2654mm / 2807mm) |
| Ceiling Height Required3(min/max) |
12' 2" / 12' 6-1/2"
(3708mm / 3823mm) |
| Motor4 |
2HP, Single Phase, 60Hz |
| Voltage4 |
208-230v |
| Speed of Rise |
52 seconds |
| Max. Load Per Arm |
2,500 lbs. (1134kg) |
Specifications subject to change without notice.
* Lift capacity ratings are based on loads equally distributed on all four arms.
1 Rise height is measured with superstructure in highest position.
2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4˝(6mm).
3 Ceiling Height required is 12’ 2” when lift column height is configured at minimum height and 12’ 6” when configured at maximum height.
4 Single phase standard. Three phase electrical available. (Part #AC3PH208, AC3PH230, or AC3PH460 at additional cost) Specify at time of order.
Ammco Lifts are available through select distributors. For a distributor in your area Click Here or call 888-760-5438
|  |